ISOLED Sys-Pro Push/Radio Mesh Multi-PWM Dimmer, 1 channel, 12-24V DC 6A
Product-No. 114435     

ISOLED Sys-Pro Push/Radio Mesh Multi-PWM Dimmer, 1 channel, 12-24V DC 6A

Sys-Pro Push/Radio Mesh Multi-PWM Dimmer, 1 Channel, 12-24V DC 6A, 36-48V DC 3A

Delivery time: 3 - 5 Days
Country:
Manufacturer

ISOLED

Height

26 mm

Width

52 mm

Material

Plastic

Voltage

48 V

Watt

144 W

Length

52 mm

IP protection class

IP 20

Housing color

White

UVP 62,30 €
-43%
35,50 €
plus 19% tax, plus shipping
(Gross price 42,25 €)
Compare
Add to watchlist
Ask question
Downloads & datasheets

Product description ISOLED Sys-Pro Push/Radio Mesh Multi-PWM Dimmer, 1 channel, 12-24V DC 6A

ISOLED Sys-Pro Push/Radio Mesh Multi-PWM Dimmer, 1 Channel, 12-24V DC 6A

Special feature:

Teachable to up to 10 Sys-Pro remotes, mesh transceiver - passes signal to next receiver max 30 meters, PWM frequency 500Hz.

Dims smoothly and without flickering from 0-100% over 4096 levels.Compatible with Skydance 2.4G 1-zone or multi-zone remote control. One RF receiver accepts up to 10 controls. Mesh function: receiver can relay received signal to another receiver within 30m range. Synchronization on multiple controllers possible. Optional: push button can be connected.

Dimming specifications:

4096 dimming levels

Push-Dim function

The equipped Push-Dim interface allows a simple dimming method using standard non-locking wall switches.

Short press:
Turns the light off.

Long press (1-6 sec):
Press and hold for stepless dimming, each additional long press will dim the light brighter or dimmer.

Dim memory:
The last selected dimming level is maintained after power off, even after a power failure.

Synchronization:
If more than one controller is connected to the same push button, press for more than 10 sec, then the system is synchronized and all lights in the groups dim to 100%. This means that in larger installations no additional cable is needed for synchronization. We recommend that no more than 25 controllers are connected to one pressure switch. The maximum length of the cable between the pressure switch and the controller should not exceed 20 meters.

Top brands